E-flite Adagio 280 Bedienerhandbuch PDF herunterladen (Seite 11)

11

EN

Service of Power Components

B

Disassembly

CAUTION: Always disconnect the battery

before handling or adjusting the propeller

or motor. Failure to do so could result in

personal injury.

Propeller

1. Remove the 2 screws (A) from the spinner (B).

Carefully separate the spinner from the back

plate.

2. Remove 2 bolts (C), 2 nuts (D) and 2 propeller

blades (E) from the back plate.

3. Remove the lock nut (F) from the propeller

shaft, then remove the back plate (G).

4. Loosen the 2 setscrews (H) and remove the

propeller shaft (I) from the motor.

Motor and Firewall

1. Remove the 4 screws (J) and motor mount (K)

from the fuselage.

2. Disconnect the motor wires from the ESC.

3. Loosen the 2 setscrews (L) and remove the

motor (M) from the motor mount.

Assemble in reverse order.

Assembly Tips

• Correctly align and connect the motor wire

colors with the ESC wires.

• Ensure the propeller blades swing freely in the

spinner back plate.

• Tools are required to loosen or tighten the

setscrews and the lock nut.

• Ensure the spinner is fully connected to the

spinner back plate for safe operation.

A B

C

E

D

JKH

M

Post Flight Checklist

9

1. Disconnect ﬂ ight battery from ESC

(Required for safety and battery life).

2. Power off transmitter.

3. Remove ﬂ ight battery from aircraft.

4. Recharge ﬂ ight battery.

9

5. Store ﬂ ight battery apart from aircraft

and monitor the battery charge.

6. Make note of ﬂ ight conditions and ﬂ ight

plan results, planning for future ﬂ ights.

F GI

L

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17

Kommentare zu diesen Handbüchern

Keine Kommentare