E-flite UMX Sbach 342 BNF Bedienungsanleitung PDF herunterladen (Seite 4)

Your Sbach 342 comes with a Celectra™ 2S 7.4V

DC Li-Po Charger and 2-Cell 7.4V 180 mAh 20C Li-

Po battery. Please visit www.horizonhobby.com for

optional battery adapters. Refer to battery warnings.

It is recommended to charge the battery pack while

you are inspecting the aircraft. The ﬂ ight battery will

be required to conﬁ rm proper aircraft operation in

future steps.

Charging the Battery

The Battery Charging Process

1. Charge only batteries that are cool to the touch and are not damaged. Look at the battery to make

sure it is not damaged e.g., swollen, bent, broken or punctured.

2. The connector of the battery is specifically designed to allow it to fit into the charge port one way

to prevent reverse polarity connection. However, check for proper alignment and polarity before

proceeding to the next step.

3. Gently press the battery connector into the charge port located on the front of the charger.

4. When you make the connection successfully, the green LED blinking on the charger slows,

indicating proper connection.

5. Press the button on the charger, the red LED will illuminate, indicating charging has begun.

6. Charging a fully discharged (not over-discharged) 180mAh battery takes approximately 50–60

minutes.

7. When battery is fully charged, the green LED will illuminate.

8. Always unplug the battery from the charger immediately upon completion of charging.

CAUTION: Overcharging a battery can cause a fire.

2S 7.4V 180mAh 20C

Lithium Polymer Battery

CAUTION: Only use a charger speciﬁ cally designed to charge a Li-Po battery. Failure to do so could

result in ﬁ re causing injury or property damage.

CAUTION: Never exceed the recommended charge rate.

LED Functions under normal operation

1. Green LED blinking with power connected but without battery ................................... Standby

2. Green LED blinking .................................................................................................... Battery is connected

3. Blinking Red LED at varying speeds ........................................................................... Charging

4. Red and Green LED blinking simultaneously ............................................................... Balancing

5. Solid Green LED ....................................................................................................... Full Charge

6. Red and Green LED ﬂ ashing rapidly ........................................................................... Error

1 2 3 4 5 6 7 8 9 ... 18 19

Keine Kommentare

E-flite UMX Sbach 342 BNF Bedienungsanleitung Seite 4